NTEPC103
 
£600.00 plus VAT
 
The NTEPC103 Electronic 2 preset Predeterming Counter system is a ready to go, pre-built unit which only requires an additional sensor to give control over most length / counting applications.

An ideal replacement for mechanical countdown preset counters such as the Trumeter 3012 / Trumeter 3016 and Baumer IVO ME230 preset counters when used along with an encoder. 

The total length is easily programmed, it will then count down towards zero. When zero is reached a relay will change allowing for machine stop. There is a second relay to give a slow down signal which can be locked at a certain count. This can also be programmed to count up from zero if required.
 
Relay outputs can be re-programmed to be either normaly closed or normaly open if required.

Supplied with a 13A lead with plug.
Sensor requires a 5 pin DIN plug.
2 Preset relays rated at 5A@250VAC
Sensor supply output 12VDC 50mA.
 
These are built to order so delivery will be 5-7 working days.