MM80AEALU - MM80 with an encoder output.
 
£1133.00 plus VAT
 
MM80AE - This measuring machine has an encoder output rather than a mechanical counter enabling the measurement to be displayed remotely on a digital display or direct to a computer. The encoder is housed in a protective cast aluminium case.
 
Fitted with a knurled Aluminium measuring wheel.

Metric measurement reading 99999.9 metres.

Built of aluminium and stainless steel components, this machine is designed for heavy duty use for cables,rope or hose length measurement. It can measure cable/rope from 5mm up to 80mm in diameter. The cable/rope is fed through the machine which uses a 1/2 metre knurled aluminium or polyurethane covered measuring wheel. There are four fixing holes, 350mm apart lengthwise and 150mm apart sideways, they will accept a M10 bolt.

Typical uses:-
Cable length measurement
Hose length measurement
Wire length measurement
Rope length measurement
Flexible hose measurement

Total length 444mm. Width 286.5mm. Height 260mm.

Encoder specification:-
Specification:
 
Input voltage range
5 to 24V (+10%).
Regulation, for 5V operation
5% with 2% maximum ripple.
Current consumption
80mA typical.
Output circuits
A, B, @ 20mA each.
Frequency response
300 KHz std.
Accuracy
0.017° or 1 Arc/Min.
Max shaft speed
7,500 rpm continuous.
Shaft sizes and types
10mm Hollow shaft (through shaft).
Housing
Aluminium with protective finish.
Operating temp.
0°C to +100°C.